Hottech Lithium battery protection IC product
Lithium batteries are widely used in our life, ranging from aviation to diving equipment, cars and robots on the ground, etc. Lithium batteries have high volume density and energy density, and have a single battery voltage of up to 4.2V They are used in mobile phones, chargers, portable electronic equipment and other fields. Lithium battery has strong charging and discharging ability and long life, which makes it a popular and widely used rechargeable battery product. In order to ensure the safety of lithium battery, lithium battery must have lithium battery protection IC in application. This product plays an important role in the charging and discharging process of lithium batteries. In this issue, Hottech will explain the working principle and application of lithium battery protection IC products. Taking HKT4056E products produced by Hottech as an example, it is widely used in lithium batteries and other products.
This HKT4056E is produced by Hottech. It is a complete CC (constant current) /CV (constant voltage) linear charger integrated circuit product, which is suitable for a single lithium-ion battery. It is specially designed to work within the USB power supply specification.
In terms of overcurrent protection, this product adjusts its charging current through thermal feedback, so that its working charging voltage can still be stabilized at 4.2V under high power or high temperature conditions. The charging current can be accurately controlled by an external resistor.
When the charging current drops to 1/10, the product automatically terminates the programmed value after the charging cycle reaches the final floating charge voltage. The floating charge voltage is the voltage that the battery maintains after being fully charged, and the capacity is maintained by compensating the self-discharge of the battery. The voltage may be kept constant throughout the operation of the battery or may be kept at a specific charging stage of the charger. With the change of battery chemistry and structure and environmental temperature, the appropriate floating voltage will change greatly. With proper voltage and temperature compensation for the battery type, the floating charger can remain connected indefinitely without damaging the battery. When the input power supply (wall adapter or USB supply) is removed, HKT4056E automatically enters the low current state, so that the loss current of the battery is reduced below 1μA, and HKT4056E can reduce the power supply current in the shutdown mode to 35 μ A..
In addition, this product also has the function of output band backflow protection. Because current backflow may lead to voltage fluctuation or overvoltage in the power system, which will affect the normal operation of other equipment, backflow protection is essential. Its trickle charging threshold is 2.9V This trickle charging threshold refers to the situation that the current provided by the charger is less than the minimum charging current required by the equipment during the charging process, which leads to the failure of normal charging of the equipment. The existence of trickle charging threshold is to protect the battery of equipment and avoid battery damage or other safety problems caused by excessive charging current. Everyone attaches great importance to the battery life and safety of equipment, and the establishment of trickle charging threshold is very important for battery charging protection.
In addition, this product also has battery temperature monitoring (battery temperature sensor is an electronic device for measuring the battery temperature, which is used to monitor the running state of the battery and protect the battery from overheating or supercooling. ), under-voltage locking (that is, when the input voltage is lower than a certain value, the power chip does not work and is in a protective state), automatic charging and two pins indicate the charging and charging termination state, etc. This product conforms to RoHS standards and does not contain lead, so customers can purchase and use it with confidence.
This HKT4056E product is packaged in ESOP-8, which has the characteristics of small size, compactness, small volume and good weldability. ESOP8 P8 packaging products are suitable for miniaturization and other portable devices, especially convenient charging devices. This product is widely used in communication, industry, consumer electronics and other fields.
Application of HKT4056E
HKT4056E has excellent product performance, and the product is stable and reliable. It can be used in mobile phones, Bluetooth devices, charging devices, charging stands and wearable products.
As a CC (constant current) /CV (constant voltage) linear charger product, HKT4056E charges the battery through an internal MOSFET, which can provide a charging current of up to 1 A when used in a single lithium-ion battery. When the voltage of VCC pin rises above UVLO level, the charging cycle begins, the current setting resistor is connected from PROG pin to ground, and the CE pin is pulled above the chip enable threshold. The CHRG pin outputs a logic low level, indicating that the charging cycle is in progress. At the beginning of the charging cycle, if the battery voltage is lower than 2.9V, the charging will enter the pre-charging mode, so that the battery voltage can reach a safe charging level. When the voltage on the BAT pin is higher than 2.9 V, the charger enters the fast charging CC mode. In CC mode, the charging current is set by RPROG.
When the battery approaches the regulated voltage of 4.2V, the charging current begins to decrease, and HKT4056E enters CV mode. When the current drops to the charging termination threshold, the charging cycle ends, and the CHRG pin is in a high impedance state, indicating that the charging cycle ends, and the STDBY pin is pulled low. The charging termination threshold is 10% of the current in CC mode.
How does HKT4056E restart the charging cycle? Please remove the input voltage and reapply or temporarily force the CE pin to 0V. When the voltage at the BAT pin is lower than the charging threshold, the charging cycle is automatically restarted. When the input voltage does not exist or the input voltage is lower than VBAT, the charger enters the sleep mode and the battery leakage current drops to less than 3 μ A.. This greatly reduces the current consumption of the battery and increases the standby time. The charger can be turned off by forcing the CE pin to GND.
HKT4056, a linear power IC product produced by Hottech, has stable performance and many applications. It has been well verified by customers and can meet the application needs of many customers. If you are interested in this integrated circuit product of Hottech, you can contact Hottech customer service for consultation.
As a brand with more than 30 years experience in discrete devices and integrated circuits, Hottech owns core assets such as Dongguan factory and Shenzhen marketing center. Among them, Dongguan factory, as the main manufacturing center, is powerful with an annual production capacity of 10 billion pieces. Hottech Dongguan factory covers an area of more than 15,000 square meters, and the production line has nearly 1,000 sets of production equipment, effectively improving the production efficiency of the production line. Hottech has accumulated rich core technologies in circuit design, semiconductor device and process design, reliability design, etc., and has a number of national invention patents and utility model patents, etc. The company has passed ISO9001, ISO14001, IATF16949 and other system certifications and continued training. Hottech has established a standardized and streamlined quality management system, and the products must undergo strict inspection before they can leave the factory. Hottech has rich products and reliable quality. At present, the company has SMA, SMB, SMC, SMAF, SMBF, ABS, DBS, MB-F, SOD-123, SOD-323, SOD-523 and SOT23-5.