HA-1101-24NL LiteOn Power Pupply
Lite-On Power Supply is known for its commitment to quality and reliability. Their products undergo rigorous testing and quality control processes to meet industry standards and ensure long-lasting performance. They employ advanced manufacturing technologies and adhere to strict quality management systems to deliver products that meet the demands of their customers.
Features![]()
|
|
Model P/N |
HA-1101-24NL |
|
Output Specification |
||
|
---------- 100W ---------- |
|
|
24V |
|
|
4.5A |
|
|
150mV |
|
|
---------- ±1% ---------- |
|
|
---------- 16ms ---------- |
|
|
----------- 0.5 sec / 30ms ---------- |
|
Input Specification |
||
|
---------- 100V~120VAC(L) / 200~240VAC(H), by select switch ---------- |
|
|
---------- 90V~132VAC(L) / 180~264VAC(H), 300Vac for 5 sec ---------- |
|
|
---------- 2.1A/100Vac; 1.2A/200Vac ---------- |
|
|
---------- 50A (cold start) ---------- |
|
|
---------- 50-60Hz ---------- |
|
|
---------- 0.75mA ---------- |
|
|
90.0% |
88.0% |
Protection Function |
||
|
--- 140% of rated voltage, latch off protection --- |
|
|
--- 150% of rated current, hiccup mode protection until fault is removed --- |
|
|
----- No damage, hiccup mode protection until fault is removed ----- |
|
|
----- No damage, O/P shut down until temperature is back to normal ----- |
|
Others |
||
|
---------- 700K hours @ rated load ---------- |
|
Environment |
||
|
---------- (operating) -20~70? /(storage) -40~85? ---------- |
|
|
(operating) 10~90% RH non-condensing / (storage) 5~95% RH |
|
|
---------- 5000 meters ---------- |
|
Mechanical |
||
|
----------129*97*30mm ---------- |
|
|
----- 10~500 Hz, 5G 20min./1cycle, 60min per axis in all axes (X, Y, Z) ----- |
|
|
310 g |
Safety |
|
|
---------- IEC/EN 60950-1, K60950-1, IEC/EN 62368-1, CNS14336-1 ---------- |
|
----- Input-Output: 4242VDC / Input-FG: 2150VDC / Output-FG: 700VDC ----- |
|
---------- Input-Output: 100Mohm @ 500VDC, 25?, 70%RH ---------- |
EMC |
|
|
---------- Conducted EMI: class A / Radiated EMI: class A ---------- |
|
---------- Conducted EMI: class A / Radiated EMI: class A ---------- |
|
---------- Harmonic distortion: class A ---------- |
|
---------- ESD: ±8KV contact discharge / ±15KV contact discharge ---------- |
|
---------- Radiated RF immunity: 3V/m ---------- |
|
---------- EFT: ±1KV (AC port) ---------- |
|
---------- Surge: ±1KV DM / ±2KV CM ---------- |
|
---------- Conducted RF immunity: 3V/m ---------- |
|
---------- Magnetic field immunity: 1A/m ---------- |
|
---------- Voltage dip immunity ----------30%, 0.5 periods 60%, 50 periods >95%, 250periods |
Note |
|
#1: All specification defined at 230Vac/50Hz, rated power and 25? ambient temperature if no mentioned specially. |
|
#2: Ripple noise is measured by a 30cm length, twisted wires with 0.47uF MLCC+22uF low ESR capacitor. #3: Calculated by Telcordia SR332 at 25? ambient temperature. #4: When operating altitude is higher than 2000m, the environment temperature derating factor is 0.5?/100m. |
|
#5: De-rating curve of AC input voltage and ambient temperature:
|