Details

CAMTEC engineers and manufactures Switch Mode Power Supplies SMPS and assemblies for the Automation Sector, Machine Building and Electronics Industry. The product range comprises AC/DC Power and DC/DC Converter for DIN-Rail, Chassis Mount, Open Frame and Rack Mount Power. Camtec fabricates Programmable DIN-Rail Power Supplies for the Test Automation, similar to a Laboratory Power Supply.

Inrush current limiters are used to limit the amount of current that can flow into a device, such as a transformer, during the initial power up. Inrush current can be very high, in some cases orders of magnitude higher than the normal operating current of the device. Limiters are typically used to protect components such as power supplies and transformers, which can be damaged when a large inrush current is present. They work by slowly allowing current to flow into a device over a period of time, limiting the peak current that can be drawn. This helps to ensure reliable operation and long life of the transformer or power supply.

ESB AC Inrush Current Limiter 3,6kW-46kW

ESB001 1TE 1PH 230Vac + N

Inrush current limiters ESB101 available for inductive and For ensuring reliability and service life of electrical equipment requires a constant load. The device is available in several versions. Minimum order is 10-15 pieces. The ESB101 current limiter is an ideal solution to the problem of saving the cost of LED lighting technology. It precisely limits the switching current. Circuit breakers are automatically connected to each power source. A lower inrush current allows the use of cables with a smaller cross-section. The cost of installing LED lighting is reduced by about 70% compared with conventional installation. Special version for LED lighting - ESB101.LED.230Vac

for capacitive loads, 4000m / 13123 ft. above sea level

3680W

ESB101 2TE 1PH 115Vac 230Vac + N

The ESB101 2TE is a budget-priced inrush peak current limiter for high loads in LED applications, complex automation systems and in the machine building. This product offers effective and interference free operation with capacitive loads. It is simple to integrate into existing equipment. Also is self-powering and does not require an external power supply.
Camtec Single (ESB101 / ESB201) resp. three-phase peak / RMS current limiters in a plastic housing (IP20/UL94V-0) for capacitive loads (1000uF to 10.000uF). These devices have an integrated bypass relay as well as a built-in temperature monitoring and comply with EN60950-1, EN61010-1, EN62368-1 as well as EN55032.

for capacitive loads, 4000m / 13123 ft. above sea level

3680W

ESB303 5TE 3x1PH 200-240Vac, 2-3Ph 400Vac + N

Camtec ESB303 three-channel inrush current limiters are designed as a 3-channel limiter for single-phase 200-240V networks or as a 3-phase limiter for 3-phase inductive and capacitive loads with different capacities. ESB303 is a 3 limiter acting in parallel, which allows you to connect 3 different AC networks with currents up to 16A (each line is limited separately). ESB303 can operate as a three-phase limiter in a 3x400 VAC network. They are used in automation systems and LED lighting to limit inrush current and, accordingly, to increase the reliability and service life of electrical equipment.

for capacitive loads, 4000m / 13123 ft. above sea level

3680W - 19200W

ESB00351 1PH 230Vac + N, PE

Camtec ESB00351 Inrush current limiters are designed for inductive and capacitive loads with different capacities and are used in automation systems and LED lighting to limit inrush current and, accordingly, to increase the reliability and service life of electrical equipment.

for capacitive loads, DIN-Rail

6900W

ESB00163 2-3PH 400Vac + PE

Camtec ESB00163 Inrush current limiters are designed for three-phase inductive and capacitive loads with different capacities and are used in automation systems and LED lighting to limit inrush current and, accordingly, to increase the reliability and service life of electrical equipment.

for capacitive loads, limits each phase separately, DIN-Rail

23000W

ESB00323 2-3PH 400Vac + PE

Camtec ESB00323 Inrush current limiters are designed for three-phase inductive and capacitive loads with different capacities and are used in automation systems and LED lighting to limit inrush current and, accordingly, to increase the reliability and service life of electrical equipment.

capacitive loads, limits each phase separately, DIN-Rail

46000W

ESB201 1PH 115Vac 230Vac + N

Inrush current limiters ESB201 in a flat rectangular housing for wall or ceiling mounting are designed for LED lighting with different power levels and are used to limit inrush current and, accordingly, to increase the reliability and service life of electrical equipment.

for capacitive loads, IP40, 4000m / 13123 ft. above sea level

3680W